Learning Journal

EXM Vancu forming

Vacuc forming

Object cannot be covery as the object will not be able to be removed with out ripping the plastic.

The casting does leave lot of detail

It also works very well for light to shine throw.

1. Pine.Speacil effects waxs and sand blasted pin. When would is sandblasted it very hard to put waxs on to wood because its hard to run the wax in.

2 Light wax Sand blasted pine. It bring out the grain

3 Special effects wax dark. Sand blasted

4. Sand blasted pine.

Sand blasting wood could be use in making marking cermanics

Tree branch wood.
Cut to strips and cut a strip out of one and contact the wood.
Sand blasted tree branch ring, Nice teeth effect on edge of wood.

EXM

Plasterseen

Just like clay but doesnt dry. This could be a used way of moulding cermanic peaces before using clay as it doesnt not dry

Easy to twist

Thumd pot

Scrape with fork

EXM Plastics

.1 first the plastic was pushed into a band saw to create long teeth like stick. Cut from one end in rows to almost he end. It was then place in vault former to heat up and then bend.

.2 Heated then twisted

.3 Sheet of plasic heated then bent

4. Shape with heat and pilet hold with drill

Drawing with Solder wire

Rapid Solding wire is very easy to bend mold to form.

Also no need to worry about wire snips as easy to break

1 Twisting wire around a pen. Pulling it off and flattening it with fingers.
2.3 Twisting wire around the pen and pushing it together creating a spring.
4.6 Simple bending wire creating following lines
5

Small Scale forging

Etch heart

EXM Tec journal

Lazier cut wood Laze etch Ply 6mm

Power 100. Speed 2

Lazier etch wood setting Ply 6mm
Power 40 speed 100

Laze Etch Lazier setting Glass 2
Power 50 speed 50

Lazer etch on back of mirror with vinel on back. After etch sand blast back to make glass transparent.